Weighing in at only 32
grams, this may be the lightest most useful item to carry on
your bike. |
|
|
|
|
|
 |
Tire
Fill |
|
Uses all standard 3/8" threaded CO2
cartridges. |
 |
|
Screw in the CO2 cartridge,
position the tire filling valve upright and push the Tire Fill.
Gas and go in seconds.
Comes with 2 foam wrapped 16g CO2 cartridges.
Replacement cartridges are affordable and readily available.
Only $24.95 plus UPS
Item P/N 50018
See special below!

 |
|
|
|
We have learned from our customers that filling
your tire is very easy with the TireFill product when
used in the correct way. Note that the thumb should not rest on
the back of the valve. This prevents the valve mechanism to
extend. You will reduce the amount of cold CO2 ice if you
position the fill valve upright. Check your tire pressure with a
gauge. |
Correct Position |
|
Incorrect Position |
 |
|
 |
|
|
|
All tires: Street
Bikes, Mountain Bikes, Motorcycles, Mopeds, Quads, anything with a
tire fill valve! |

|
  |
Get the Tire Fill kit AND the 5 pack
of the replacement
cartridges for only:
$25.00 plus UPS
Regularly $33.84
 |
Inflation Chart
ATV
TIRES FILLED TO 4 psi |
You'll need 24g of CO2 per
tire
|
|
MOTORCYCLE STREET
TIRES FILLED TO 25 psi |
You'll need 50g of CO2 per
tire
|
|
BICYCLE -MOUNTAIN BIKE TIRE
FILLED TO 40 psi |
You'll
need 16g of CO2 per tire
|
|
BICYCLE -BMX TIRES FILLED TO
45 psi |
You'll
need 12g of CO2 per tire |
|
BICYCLE - SERIOUS STREET
FILLED TO 130 psi
|
You'll
need 16g of CO2 per tire
|
|
Bicycle
Race
the bike, challenge the bike, coast, pop a wheelie, lay it down,
jump it, ride to school, commute to work, deliver food or just
sight see; you don't ride without a helmet and your CO2. |
 |
- To fill the average
Mountain Bike tire to 40 psi you will need 16g of CO2
- To fill the average
BMX Bike tire to 45 psi you will need 12g of CO2
- To fill the average
Serious Street Bike tire to 130 psi you will need 16g of CO2
|
ATV
The trail
can be uncertain at times but that doesn't mean you shouldn't go. Bring
some safety gear and a sandwich, but please don't forget the CO2
Cartridges. |
 |
ATV tire manufacturers recommend
tire pressures as low as 2.7 psi to as high as 10 psi. What is
the correct pressure for your ATV tires?
First, look for the orange and white sticker (it�s usually on the
left rear fender) on your ATV. Front and rear psi may be
different, so don�t assume all tire pressures are the same. |
To fill the average ATV tire
to 4 psi you will need 24g of CO2 |
Motorcycle
The road
rolls freely under you, wind in your face and bugs in your teeth. So
pack sunscreen and toothpicks, but please don't forget the CO2
Cartridges. |
 |
Check your tire pressure often and
adjust as necessary, using an accurate tire gauge. Motorcycle
tire manufacturers recommend checking pressure at least once a
week. However, many motorcycle safety experts recommend checking
tire pressure and tread wear every time you take your bike out.
After all, you ask more of your motorcycle tires than you do
your car tires. So it's wise to ensure they're roadworthy each
time you ride. |
To fill the average
Motorcycle street tire to 25 psi you will need 50g of CO2 |
 |
|
 |
|
 |
Leland Special Force� 12g CO2 non threaded , safety
cap, easy to pierce, 12 pc Clamshell $7.95
 |
|
Leland Special Force� 12g CO2 non threaded ,
safety cap, easy to pierce, 25 p Bucket $14.00
 |
|
Maximum Inflation� Fits All Inflators 16g CO2
Standard non threaded, easy pierce, 6 p Clamshell $6.89
 |
|
|
|
|
|
 |
|
 |
|
 |
Maximum Inflation� Fits All Inflators 16g CO2
Standard 3/8"-24 threaded, easy pierce, 5 p Clamshell $8.89
 |
|
Maximum Inflation� Fits All Inflators 25g CO2
Standard 3/8"-24 threaded, easy pierce, 3 p Clamshell $17.81
 |
|
Leland Military� 38g CO2 Standard 3/8"-24
Threaded, easy pierce, 4 p Clamshell $18.00
 |
|
|
|
|
|
 |
|
 |
|
|
Maximum Inflation� Fits All Inflators 45g CO2
Standard 5/8"-18 threaded, easy pierce, 3 p Clamshell $20.00
 |
|
Leland� 74g MAXIMUM CARTRIDGE! 5/8"-18 Threaded,
easy pierce, 2 p Clamshell $21.00
 |
|
|
|
|
|
|
|
|
|